Polylactide or polylactic acids are synthetic polymers, which are among the polyesters. Our materials are made of 100% renewable resources. It is therefore an bio-plastic. The production of bio-plastics produces significantly less CO2 emissions (~ 0.6 kg CO2 / kg material) than comparable materials (ABS ~ 3.8 kg CO2 / kg material). Furthermore, PLA can be composted industrially.
Colour | black, nature, red, silvergrey, white |
---|---|
Diameter | 1,75 mm, 2,85 mm |
Size | 1000 g, 500 g |
Processing note
PLA is one of the standard printing materials. Easy processing, low distortion and low odor characterize it. The printing temperature is between 190 ° C and 260 ° C. A heated plate is not necessary, but up to 65° C this improves the adhesion. The printing speed is selected depending on the requirements.
Security note
Never print in living rooms. Make sure that the resulting vapours are not inhaled. We recommend the use of a closed printing chamber and the filtration of the exhaust air according to the legal requirements. Read the safety data sheet carefully. W2 Polymer GmbH is not liable for any damage, injury or loss caused by the use of our materials. If you need more information, help or support, please contact: support@w2polymer.com
Downloads
Technical data sheet:
TDS_W2Filaments PLA_HS_EN_V_1_0
Security data sheet:
SDS_W2Filaments PLA_HS_HI_EN_V_1_0
Related products
Filaments
Filaments
Filaments
Filaments